|Weight:||150g ( Not Including Batteries )||Color:||Green And White|
|IP Rating:||IP20||Material:||Acrylic, Plastic|
|Power Supply:||2*1.5V AAA Batteries||C/F Degree Convert:||Yes|
|Measuring Distance:||1-10cm||Display:||LED Backlight, Three Colors Readout|
|Accuray:||0.1C/0.1F Degree||Memory:||32 Sets Records|
|Resolution Ratio:||0.1℃/℉||Safety Standard:||GB 9706.1|
|Mode:||Object And Body||Lifetime:||3 Years|
|After-sale ServiSpare Parts Or Replacementsce:||Online Technical Support|
IP20 Forehead Infrared Thermometer,
0.1F degree Forehead Infrared Thermometer,
GB 9706.1 digital infrared baby thermometer
Baby Adult Digital Gun Type Non-Contact Infrared Forehead Thermometer
Non contact guarantees the best hygiene, thereby greatly reducing the risk of being infected by bacterial viruses.
Efficient & Accurate:
Simple operation, non-contact, sensitive, no need to wait accurate measurement
Best Infrared Sensor:
Self-developed infrared module, accuracy up to 0.1 ºC, stable, fast, accurate, strong adaptability, 5.5um
infrared filter, a wider measurement range
Smart Power Saving:
Support automatic shutdown, two AAA batteries can be used for over 3000 times.
|Display resolution||32.2℉/ 0.1℃|
|Body temperature mode||±32.36℉ / ±0.2℃|
|Measuring range||( 89.6℉ ~ 107.6℉ ) /( 32℃~42℃ ), body mode; ( 32℉ ~ 212℉ ) /( 0℃~100℃ ), object mode|
|Operating ambient temperature||( 50℉ ~ 104℉ ) /( 10℃~40℃ )|
|Operating ambient humidity||≤80%RH|
Storage temperature range
Reading memory storage
( -13℉ ~ 131℉ ) /( -25℃~55℃ )
|Battery||2X AAA alkaline dry battery|
|Weight||150g ( without battery )|
Hold the NCIT sensing area perpendicular to the forehead and instruct the person to remain stationary during measurement.
The ideal measure distance between the NCIT and forehead is about 3~5cm.
Do not touch the sensing area of the NCIT and keep the sensor clean and dry.
Incoming quality inspection
Quality inspection of all assembly and procurement materials according to standards
a. Component stress test
b. Hardware reliability test
c. Automated software reliability test
d. Real environment simulation test
Process control: mutual check process in assembly line
a. Process quality management
b. Independent inspection by operators
c. Process inspection
d. Handling abnormal quality
e. Segmentation and identification of bad products, bad statistics
Maintenance and precautions
Please keep the sensor and probe chamber clean, otherwise it will affect the accuracy of measurement.
Surface cleaning: wipe the dirt with clean soft cloth or cotton silk with a little medical alcohol or water.
Sensor and chamber cleaning: gently wipe probe chamber or sensor top with clean soft cloth or cotton stick with a little medical alcohol. It can only be used after the alcohol is fully utilized.
Before using, please read the instructions carefully and make sure that the battery is installed .
It is forbidden to immerse the thermometer in any liquid. It is forbidden to keep the thermometer in excessive high or low temperature for a long time.
Do not disassemble the thermometer body.
Thermometers should not be used under the sun or in water.
Please do not use in the environment with strong electromagnetic interference.
Place the thermometer in a position that the child can not touch.
It is suggested to practice many times to familiarize ourselves with measurement methods and try not to change the factory settings of products.
The result of measurement can not replace the doctor’s diagnosis.
There is no need for special maintenance during use. If there is a malfunction, please contact the seller or manufacturer.
Please dispose of the waste and residue at the end of the service life of the product according to local laws and regulations.
Contact Person: Cathy Zhou