|Main Material:||PC Explosion Proof Material||Product Size:||110*165*95CM|
|Power Supply:||4*1.5V AA Battery||Voltage:||6V/1A|
|Sensor Range:||3-8cm||Liquid Dosage:||1 Ml/time..|
|Safety Lock:||Yes||Base Material:||High Gloss ABS|
CE Touchless Soap Dispenser,
600ml touchless hand soap dispenser,
0.6L wall mounted touchless soap dispenser
Hand Sanitizer Dispenser/Non Contact Gel Soap Dispenser / Automatic Induction Alcohol Sanitizer Spray Dispenser Machine
It is suitable for kitchens,washrooms,bathrooms,schools,kindergartens,offices,restaurants , bars , Internet cafes , KTV , supermarkets , hospitals and other public occasions or at home . Wash your hands every day can help you reduce the chance of bacteria breeding and spreading.
Rapid liquid extraction
removable back panel
separate design, easy to punch and clean
single liquid output 1ml, no waste of quantitative liquid output
infrared induction, contact free drainage and rejection of cross infection, distant sensing
Choose a suitable place to install this dispenser,do not install it on the mirror surface and keep 40cm free from sensor
1. Pull mounting plate down out of the back.
2. Mark three holes,then drill three.
3. Fix the mounting plate firmly on the wall.
4. Open the battery compartment,and put four AA alkaline batteries into the battery compartment to ensure the battery direction is correct.
5. Installing the backplane on the back.
6. Open the top cover and fill in the hand sanitizer.
7. Turn on the power switch.
8. Put your hand on the sensor area at the bottom to work.The first time you use the dispenser,you need to operate it several times to remove the air inside.
9. When the battery power is low,the red LED will flash quickly,indicating that you need to replace the battery
Contact Person: Albert Li