|Color:||Blue And White/customized||Certificate:||EC,ISO13485,FDA|
|Material:||ABS Plastic||Power:||2* AAA Batteries|
|Display:||OLED Display Screen||Power Consumption:||Smaller Than 30mA|
|Automatic Turn Off:||5 Seconds||SpO2 Measuring Range:||0%- 100%|
|Pulse Rate Measuring Range:||30 Bpm - 250 Bpm||Accuracy:||±2bpm Or±2% Select Larger|
|Net Weight:||53g||Gross Weight:||86g|
OLED Finger Pulse Oximeter,
FDA Finger Pulse Oximeter,
SPO2 finger heart rate monitor
Large OLED Display Portable Finger Pulse Oximeter Blood Oxygen Saturation
Monitor SPO2 with Batteries
1,EASY TO USE: Our pulse monitor is easy to use and has an efficient One Button
Operation. Our SPO2 Sensor will spot check and display in real time SpO2, PR, Pulse
bar graph which great for checking your pulse signal strength
2,LUXURY AND RELIABILITY: Our accurate dual color oximeter has SpO2 wave
forms in 4 directions, 6 display modes, and 10 levels of adjustable brightess. Comes
with a battery-low indicator
3,OUT OF BOX READY: Our portable oxygen saturation machine comes with Instruction
manual, 2 AAA alkaline batteries, Neck lanyard (detachable and adjustable length) you'll
be ready to use your portable oxygen sensor right out of the box
4,SUITABLE FOR ALL AGES: Our oxygen saturation finger monitor can be used as a
pediatric pulse oximeter for kids and children as well as a blood oxygen monitor for adults
NOTE: This device is for Sports and Aviation use only and not intended for medical use.
It's great for mountain climbers, bikers, trainers, aviators, and general sport enthusiasts
to spot check SpO2 on the fly.
How to ensure the accuracy of your measurement?
1,Moving too fast will affect the accuracy; try to stay still while waiting for your reading.
2,When the oxygen saturator and the heart are at the same level, the measurement
results are optimal.
3, Avoid nail polish or long nails on the finger used for the reading. Fingers should not
be wet at all either.
4,Ring finger, middle finger and index finger are recommended as suitable monitor position
1,The uncomfortable or painful feeling may appear if using the device ceaselessly,
especially for the microcirculation barrier patients. It is recommended that the sensor
should not be applied to the same finger for over 2 hours.
2,For the individual patients, there should be a more prudent inspecting in the placing
process. The device can not be clipped on the edema and tender tissue.
3,The light (the infrared is invisible) emitted from the device is harmful to the eyes,
so the user and the maintenance man, can not stare at the light.
4,Testee can not use enamel or other makeup.
5,Testee's fingernail can not be too long.
6,Please peruse the relative content about the clinical restrictions and caution.
7,This device is not intended for treatment.
1) Insert the two batteries properly to the direction, and then replace the cover.
2) Open the clip as shown in Figure 5.
3) Let the patient's finger put into the rubber cushions of the clip (make sure the finger
is in the right position), and then clip the finger.
4) Press the switch button once on front panel.
5) Do not shake the finger and keep t he patient at ease during the process. Meanwhile,
human body is not recommended in movement status.
6) Get the infonnation directly from screen display.
7) The button has three functions. When the device is power off, pressing the button
can open it; When the device is power on, pressing the button shortly can change direction
of the screen; When the device is power on, pressing the button long can change brightness
of the screen
Contact Person: Mary Yang