|Material:||ABS Plastic||Color:||Blue And White/customized|
|Certificate:||EC,ISO13485,FDA||Power:||2 Dry Batteries|
|Display:||OLED Display Screen||Power Consumption:||Smaller Than 30mA|
|SpO2 Measuring Range:||0%- 100%||Pulse Rate Measuring Range:||30 Bpm - 250 Bpm|
|Automatic Turn Off:||5 Seconds||Accuracy:||±2bpm Or±2% Select Larger|
FDA heart monitor finger sensor,
30mA blood oxygen level finger monitor,
30 bpm Finger Pulse Oximeter
Navy Blue Fingertip Pulse Oximeter Blood Oxygen Saturation Monitor with Lanyard
[Accurate & Reliable Detection]: Adopted advanced chipset and infrared detector,
the pulse oximeter can ensure that you will get accurate and reliable reading.
Fingertip pulse oximeter accurately determines your SpO2 and pulse rate and
shows conveniently on a large digital LED display.
[Easy to Use]: Just put your finger in, and press the button, the readings will show
on the display within 8s. One button control makes measurement more convenient
and easier, even the kids and the seniors can operate it alone. Our SpO2 sensor
supports spot check and displays in real time your pulse rate, oxygen saturation
and pulse bar graph which shows the intensity of the signal strength.
[User Friendly Design & Portable]: The pulse oximeter adopts medical-grade silicone
finger mold, providing you with a comfortable measurement. Compact design allows
you to put it into the pocket or hang it on your neck with a lanyard and carry it anywhere
and measure your heart rate and blood oxygen anytime.
[Auto Shut-off & Long Battery Life]: The pulse rate monitor will automatically shut off
when it does not detect your fingers within 5 seconds, which ensures low power consumption.
2*AAA batteries included support 600 times measurement and more than 30 hours of continuous
[Wide Application]: Liorque pulse oximeter is suitable for home use and outdoor use and
accommodates wide range of finger sizes - children to adult. You should only use the pulse
oximeter before or after your exercise. You must remain stationary while the pulse oximeter
measure your pulse rate and SpO2 levels.
|Display Information||Display Mode|
|The Pulse Oxygen Saturation(SpO2)||LED|
|Pulse Intensity (bar -graph)||LED|
|SpO2 Parameter Specification|
|Measuring range||0%~-100%, (the resolution is 1%).|
|Accuracy||70%~100%±2%, Below 70% unspecified.|
Red light (wavelength is 660nm)
Infrared (wavelength is 880nm)
|Pulse Parameter Specification|
|Measuring range||30bpm~250bpm (the resolution is 1 bpm)|
|Accuracy||±2bpm or±2% select larger|
|Range||Continuous bar-graph display, the higher display indicate the strong pulse|
|1.5V (AAA size) alkaline batteries x 2 or rechargeable battery|
|Battery Useful Life|
|Two batteries can work continally for 20 hours|
|Dimensions and Weight|
|Dimensions||57(L) x 31(W) x 32(H) mm .|
|Weight||About 50g (with the batteries)|
a) Temperature :-40℃~+60℃
b) Relative humidity :<95%
c) Atmospheric pressure :500hPa~1060hPa
a) Temperature :10℃~40℃
b) Relative Humidity :s75%
c) Atmospheric pressure :700hPa~1060hPa
1) Display Format: OLED Display;
SpO2 Measuring Range: 0%- 100%;
Pulse Rate Measuring Range: 30 bpm - 250 bpm;
Pulse Wave Display: columniation display and the waveform display.
2) Power Requirements: 2 x1.5V AAA alkaline battery(or using the
rechargeable battery instead), adaptable range: 2.6V~3.6V.
3) Power Consumption: Smaller than 30mA.
4) Resolution: 1% for SpO2 and 1 bpm for Pulse Rate.
5) Measurement Accuracy: ±2% in stage of 70%-100% SpO2 , and
meaningless when stage being smaller than 70%.±2 bpm or±2%
(select larger) for Pulse Rate.
6) Measurement Performance in Weak Filling Condition: SpO2 and
pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2
error is ±4%, pulse rate error is +2 bpm or±2% (select larger).
7) Resistance to surrounding light: The deviation between the value
measured in the condition of man-made light or indoor natural light and
that of darkroom is less than ±1%.
8) It is equipped with a function switch. The Oximeter can be powered
off in case no finger is the Oximeter within 5 seconds.
9) Optical Sensor
Red light (wavelength is 660nm, 6.65mW)
Infrared (wavelength is 880nm, 6.75mW)
Contact Person: Mary Yang